Prg Controlling VARI-LITE Equipment Using DMX 512 Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 176
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
SYSTEM OPERATION : DMX512 MODES AND PATCHING
02.3004.0300.54 17
1
Note: The Focus timing channel will affect only the VLM moving mirror’s pan transitions when the
rotation channel is used.
Mini-Stepping
Mini-stepping has been added for the VL6 gobo and color wheels when an extended mode (Mode 2, 4,
6, 8 or 10) is used. Mini-stepping, which smooths wheel transitions, will be active for Wheel 1 (gobo)
when the beam time channel has a value between 1 and 254. It will be active for Wheel 2 (color) when
the color time channel has a value between 1 and 254. When the value is set at either 0 or 255, mini-
stepping will be inactive.
Luminaire Reset
The ability to reset (recalibrate) a luminaire is available for DMX512 consoles. The reset channel will
cause the associated luminaire to recalibrate when set to 33% (84 in DMX512) for three seconds and
then returned to zero. (This must be done with a numeric keypad, not with an encoder or
potentiometer.)
When used with a DMX Power Pack (DPP) or Series 200 luminaires, this channel also allows for
remote start and douse of an arc source. When the channel is set to 66% (168 in DMX512) for three
seconds and then returned to zero, the lamp will douse. When set to 99% (252 in DMX512) for three
seconds and then returned to zero, the lamp will strike. (This should be done with a numeric keypad
not with an encoder or potentiometer.)
Note: Intermediate values occurring between the command value and zero will cancel the command.
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 175 176

Comentarios a estos manuales

Sin comentarios