Prg Bad Boy User Manual 1.6 Manual de usuario descargar pdf (Pagina 28)

20 BAD BOY

SPOT LUMINAIRE USER MANUAL

Vertical "Yoke Out" Hang

The Bad Boy Spot Luminaire can be hung in a vertical position, if required. In this configuration, the luminaire should

be positioned so that the interface panel (display) is facing downward for ease of programming.

WARNING: The luminaire is heavy. Use caution when lifting.

WARNING: The vertical configuration requires 3 people to hang and secure the luminaire.

WARNING: Two safety cables and at least two truss hooks should be used in all hang configurations.

To install in vertical hang:

Step 1. Orient Hanging Brackets as shown in Figure 2-6.

Step 2. Place Hanging Bracket down over buttons and slide until bracket locks into place (you will hear a "click"

when bracket is locked).

CAUTION: Hanging Brackets must be installed in the orientation shown in Figure 2-6 so that the interface

panel (display) will face downward.

Figure 2-6: Attaching Hanging Brackets

Step 3. Roll case to mounting location as required (Figure 2-7).

Step 4. Using two people, carefully lift luminaire into mounting position so that

display is facing downward

Step 5. Using a third person, secure in place by tightening Truss Hook wing bolts. Ensure that luminaire is fully

supported.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 103 104

Sin comentarios

Prg Bad Boy User Manual 1.6 Manual de usuario Pagina 28