Prg Bad Boy User Manual 1.6 Manual de usuario Pagina 79
- Pagina / 104
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
BAD BOY
®
SPOT LUMINAIRE USER MANUAL 71
Cleaning Gobo, Color and Dimmer Wheels
Tools:
Micro Fiber cloth (06.6085.0001.0)
OptiMax™ Ultra Pure Cleaning Solution (06.6084.0001.0)
Cotton gloves or finger cots
#2 Phillips screwdriver
To clean gobo, color and dimmer wheels:
CAUTION: Use ONLY OptiMax™ Ultra Pure Cleaning Solution to clean optical components. DO NOT use
Window Cleaner on gobo, color, or dimmer wheels! Wear cotton gloves or finger cots when handling optical
components.
CAUTION: The optical components are very fragile, use extreme caution when cleaning! Color gobos have
thin layers applied to one side that can be damaged if cleaned too roughly. Use caution.
WARNING: Remove power from luminaire before this procedure.
Step 1. Remove power from luminaire.
Step 2. Remove Head Covers. (Refer to "Removing the Head Covers" on page 62.)
Step 3. To clean Gobos:
a. Remove each gobo. (Refer to "Replacing a Gobo" on page 75.)
b. Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, carefully clean gobos.
DO NOT use window cleaner!
Step 4. To clean Designer Wheel:
a. Remove each filter. (Refer to "Replacing a Designer Color Filter" on page 78.)
b. Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, carefully clean filters.
DO NOT use window cleaner!
Step 5. To clean Color Wheels:
a. Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, carefully clean color wheels.
DO NOT use window cleaner!
b. Rotate wheels to access all surfaces. It will also be necessary to rotate the Gobo Wheel in order to use
the gobo "open" position to access some parts of the Color Wheel.
Step 6. To clean Dimmer Wheel:
a. Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, carefully clean Dimmer Wheel.
DO NOT use window cleaner!
b. Rotate wheel to access all surfaces. It will also be necessary to rotate the Color Wheels in order to use
the "open" position to access some parts of the Dimmer Wheel.
Step 7. Replace Head Covers.
- SPOT LUMINAIRE 1
- FOREWORD 3
- II BAD BOY 4
- Notes de sécurité 5
- Revision History 6
- TABLE OF CONTENTS 7
- Appendix B. Glossary 8
- INTRODUCTION 9
- Customer Service 10
- SPOT LUMINAIRE USER MANUAL 3 11
- 4 BAD BOY 12
- DESCRIPTION 13
- FEATURES 14
- Luminaire Models 15
- COMPONENTS 16
- Major Components and Controls 17
- 10 BAD BOY 18
- 12 BAD BOY 20
- INSTALLATION 21
- DMX512 Cables 22
- Ethernet Cables 24
- INSTALLATION PROCEDURES 25
- Standard Hang 26
- POSITIONING: 27
- SPACING: 27
- 20 BAD BOY 28
- Remove Luminaire From Case 29
- Attach to Vertical Truss 29
- Standing Position 30
- Connecting Power and Data 31
- For DMX512 systems 32
- Powering Up the Luminaire 33
- Bypassing Calibration 34
- Setting a Starting Address 35
- Ethernet (Art-Net) Comm 36
- Starting the Lamp 37
- Configuring Comm Loss Setting 38
- ACCESSORY OPTIONS 39
- Enabling Pan/Tilt Free Mode 40
- OPERATION 41
- MENU SYSTEM 42
- Battery Wake Switch * 43
- Menu System Overview 44
- Menu Details 45
- Lamp Screen 46
- Configuration Screen 46
- Pan/Tilt Screen 47
- Information Screen 47
- Communication Screen 48
- Status Screen 48
- Test Screen 49
- DMX512 OPERATION 50
- Wheel Control 51
- Control Channel 52
- Wheel Channel 52
- Control Channels 53
- Timing Channels 54
- Table 3-8: Timing Channels 55
- 48 BAD BOY 56
- OUT OF ALIGNMENT 58
- GOBO WHEEL #2 58
- PROPERLY ALIGNED 58
- GOBO WHEEL #1 58
- TROUBLESHOOTING 59
- SOFTWARE UPDATE 59
- EQUIPMENT HANDLING 59
- ROUTINE MAINTENANCE 59
- Mechanism Errors 62
- Other Errors 63
- Mechanical Test 65
- Group Test 66
- Software Crossload 68
- Removing the Aft Cover 71
- Removing the Enclosure Covers 72
- 66 BAD BOY 74
- If using 75
- Cleaning the Lenses 76
- DO NOT use window cleaner! 77
- 70 BAD BOY 78
- Remove to Access Lenses 78
- CAUTION: 78
- Replacing the Lamp 80
- Adjusting the Lamp 82
- Replacing a Gobo 83
- EXPLODED VIEW 87
- 80 BAD BOY 88
- TECHNICAL SPECIFICATIONS 89
- Bad Boy Spot Luminaire 90
- (766 mm) 92
- 30.15" 92
- Photometric Data 93
- Narrow Zoom 94
- Medium Zoom 95
- Wide Zoom 96
- Operation at Reduced Power 97
- 90 BAD BOY 98
- GLOSSARY 99
- Glossary of Terms 100
- 94 BAD BOY 102
- SPOT LUMINAIRE USER MANUAL 102
- Production Resource Group 104
- Dallas Office 104
- Dallas, Texas 75247 104
Relacionado con productos y manuales para Encendiendo Prg Bad Boy User Manual 1.6
(115 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.121 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales