Prg Bad Boy User Manual 1.6 Manual de usuario descargar pdf (Pagina 70)

62 BAD BOY

SPOT LUMINAIRE USER MANUAL

ROUTINE MAINTENANCE

Removing the Head Covers

To access some interior head components, one or both of the Head Covers may need to be removed.

Parts:

21.9812.0630 2 EA ASSY, HEAD COVER

Tools:

#2 Philips screwdriver (manual screwdriver only)

To remove Head Covers:

Step 1. At Head Cover, remove two 8-32 x 3/8" PPB screws (Figure 4-1).

Step 2. Remove Head Cover from luminaire.

Figure 4-1: Removing Head Covers

CAUTION: DO NOT use a power screwdriver when re-installing the 8-32 x 3/" PPB screws. This may

damage the hole threads.

Use a manual screwdriver only!

Step 3. Replace Head Cover as follows:

a. Set cover in place and slide rear corners under lip of Aft Cover.

b. At front of Head Cover, press with equal pressure on both sides until leading edge of cover snaps into

place under front ring casting. (You will hear a "pop" when the cover snaps into place.)

c. Using manual #2 Philips screwdriver, re-install screws.

R2 / Designer Wheel

Head Cover

R1 Head Cover

8-32 x 3/8" PPB

Screw (2 ea)

Aft Cover

CAUTION:

Hand tighten only. DO NOT use a

power tool on Head Cover screws.

Front

Ring

Casting

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 103 104

Sin comentarios

Prg Bad Boy User Manual 1.6 Manual de usuario Pagina 70