Prg Bad Boy User Manual 1.6 Manual de usuario Pagina 51
- Pagina / 104
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
BAD BOY
®
SPOT LUMINAIRE USER MANUAL 43
Wheel Control
Every wheel, gobo or color, as well as the gobos within a wheel, follow the exact same method of control. Select the
mode with the associated control channel: continuous [index], discrete [step], spin, random slow, medium, and fast,
with strobe range at the end.
The preceding 16-bit channel sets either your choice (a gobo or color in continuous, discrete, or strobe modes,
indexed position for gobos), or your rate (spin/gobo rotation). The strobe speed range at the end sets how fast your
selection on the preceding 16-bit channel strobes to open. Gobo wheels, color wheels, and gobos all follow this same
logic, and the same control channel ranges.
Setting the Shortest Path: All wheels take the shortest path on a full speed command (instantaneous change to a
new DMX value with timing channel set to 0 or 255). If the timing channel is set to enable a timed transition, the wheel
will travel the "natural" path, i.e., it will not cross over the home position. Note that many control consoles will execute
a crossfade by sending a sequence of incremental DMX value changes, which will explicitly determine the path that
the wheel will take.
Table 3-2: Wheel Control
Range Function Notes
0-9 Continuous Continuous wheel positioning
10-19 Discrete Positioning limited to half panel increments
20-39 Spin
Continuous range from full reverse spin to no spin to full forward
spin
40-43 Slow Random Random strobe - slow rate
44-46 Medium Random Random strobe - medium rate
47-49 Fast Random Random strobe - fast rate
50-255 Speed Range Variable strobe rate from slow to max speed
Table 3-3: Gobo Wheel
Position DMX Value Notes
Open 0
DMX values are for
full panel positions
(Continuous mode).
1 7641
2 16023
3 24398
4 32768
5 41142
6 49511
7 57894
* Bad Boy CMY Color Luminaire: the CMY wheels
are open at DMX value 0 and fully saturated at
DMX value 65535.
Table 3-4: Quantum Color Wheels
Position DMX Value Notes
Open 0
DMX values are for
full panel positions
(Continuous mode).
*
This chart applies to
all color wheels.
1 8192
2 16384
3 24576
4 32768
5 40960
6 49152
7 57344
- SPOT LUMINAIRE 1
- FOREWORD 3
- II BAD BOY 4
- Notes de sécurité 5
- Revision History 6
- TABLE OF CONTENTS 7
- Appendix B. Glossary 8
- INTRODUCTION 9
- Customer Service 10
- SPOT LUMINAIRE USER MANUAL 3 11
- 4 BAD BOY 12
- DESCRIPTION 13
- FEATURES 14
- Luminaire Models 15
- COMPONENTS 16
- Major Components and Controls 17
- 10 BAD BOY 18
- 12 BAD BOY 20
- INSTALLATION 21
- DMX512 Cables 22
- Ethernet Cables 24
- INSTALLATION PROCEDURES 25
- Standard Hang 26
- POSITIONING: 27
- SPACING: 27
- 20 BAD BOY 28
- Remove Luminaire From Case 29
- Attach to Vertical Truss 29
- Standing Position 30
- Connecting Power and Data 31
- For DMX512 systems 32
- Powering Up the Luminaire 33
- Bypassing Calibration 34
- Setting a Starting Address 35
- Ethernet (Art-Net) Comm 36
- Starting the Lamp 37
- Configuring Comm Loss Setting 38
- ACCESSORY OPTIONS 39
- Enabling Pan/Tilt Free Mode 40
- OPERATION 41
- MENU SYSTEM 42
- Battery Wake Switch * 43
- Menu System Overview 44
- Menu Details 45
- Lamp Screen 46
- Configuration Screen 46
- Pan/Tilt Screen 47
- Information Screen 47
- Communication Screen 48
- Status Screen 48
- Test Screen 49
- DMX512 OPERATION 50
- Wheel Control 51
- Control Channel 52
- Wheel Channel 52
- Control Channels 53
- Timing Channels 54
- Table 3-8: Timing Channels 55
- 48 BAD BOY 56
- OUT OF ALIGNMENT 58
- GOBO WHEEL #2 58
- PROPERLY ALIGNED 58
- GOBO WHEEL #1 58
- TROUBLESHOOTING 59
- SOFTWARE UPDATE 59
- EQUIPMENT HANDLING 59
- ROUTINE MAINTENANCE 59
- Mechanism Errors 62
- Other Errors 63
- Mechanical Test 65
- Group Test 66
- Software Crossload 68
- Removing the Aft Cover 71
- Removing the Enclosure Covers 72
- 66 BAD BOY 74
- If using 75
- Cleaning the Lenses 76
- DO NOT use window cleaner! 77
- 70 BAD BOY 78
- Remove to Access Lenses 78
- CAUTION: 78
- Replacing the Lamp 80
- Adjusting the Lamp 82
- Replacing a Gobo 83
- EXPLODED VIEW 87
- 80 BAD BOY 88
- TECHNICAL SPECIFICATIONS 89
- Bad Boy Spot Luminaire 90
- (766 mm) 92
- 30.15" 92
- Photometric Data 93
- Narrow Zoom 94
- Medium Zoom 95
- Wide Zoom 96
- Operation at Reduced Power 97
- 90 BAD BOY 98
- GLOSSARY 99
- Glossary of Terms 100
- 94 BAD BOY 102
- SPOT LUMINAIRE USER MANUAL 102
- Production Resource Group 104
- Dallas Office 104
- Dallas, Texas 75247 104
Relacionado con productos y manuales para Encendiendo Prg Bad Boy User Manual 1.6
(115 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.095 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales