Prg Bad Boy Field Service Manual Manual de usuario Pagina 12
- Pagina / 115
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
4 BAD BOY
®
SPOT LUMINAIRE FIELD SERVICE MANUAL
FEATURES
Overview
The Bad Boy Spot Luminaire from PRG Lighting combines the qualities of a
traditional automated light with a large venue fixture.
Features
+ Philips MSR Gold™ FastFit lamp that can be set to levels 900W, 1200W, or
1400W.
+ Built-in LCD touchscreen display which provides access to control,
configuration, status, and testing functions.
+ Zoom lens system consisting of four groups of lenses - each independently
controlled for accuracy while maintaining focus during zoom changes.
+ Zoom range of 8:1 from a narrow spot of 7° to a wide flood of 56°.
+ Edge control for gobo focus and gobo morphing.
+ Mechanical iris which provides continuous beam size control for both rapid
changes and smooth timed beam angle changes.
+ 8-inch diameter front lens which produces a large, full beam that easily can be
varied by the luminaire’s zoom lens and beam size iris.
+ Full-field dimming from 0 to 100% with accurate slow-speed control as well as fast bumps.
+ Standard Version
- Quantum Color® system featuring four (4) color wheels with seven discrete colors on each
wheel: one (1) designer wheel with user-changeable color filters and three (3) fixed color wheels organized into
Cyan, Magenta, and Yellow (CYM).
+ CMY Version - CMY color system featuring three (3) cross-fading color wheels (Cyan, Magenta, and Yellow), plus
one (1) designer wheel with user-changeable color filters.
+ Instantaneous color bumps and flashes as well as smooth control for timed color changes.
+ Two (2) indexable, rotating gobo wheels with seven (7) gobos per wheel. Gobos are individually calibrated so the
unit will automatically index the orientation of each gobo regardless of placement.
+ Variable frost for smooth diffusion.
+ Servo-powered, lightning fast strobe mechanism.
+ Precision glass reflector with dichroic cold mirror coating.
+ On-board battery to address and configure fixture without main power.
+ Three-phase, high-speed servo motors for pan and tilt to provide repeatable, precise responses.
+ Pan and tilt locking mechanisms which automatically unlock when power is applied to the fixture.
+ Pan range of 540° and a tilt range of 270°.
+ Can be mounted and operated in any orientation.
+ Compatible with all PRG consoles and a wide variety of DMX512 and Art-Net consoles. An internal Ethernet
switch allows for daisy-chaining fixtures.
- SPOT LUMINAIRE 1
- FOREWORD 3
- II BAD BOY 4
- Notes de sécurité 5
- Revision History 6
- TABLE OF CONTENTS 7
- Appendix B. Wiring Diagrams 8
- INTRODUCTION 9
- Customer Service 10
- DESCRIPTION 11
- FEATURES 12
- Luminaire Models 13
- COMPONENTS 14
- Head and Enclosure Components 15
- Yoke Components 16
- Pan-Side Yoke Leg 17
- 10 BAD BOY 18
- 12 BAD BOY 20
- TESTING & TROUBLESHOOTING 21
- Test Screen 22
- Mechanical Tests 23
- Group Test 24
- TROUBLESHOOTING 25
- Mechanism Errors 26
- Other Errors 26
- Basic Troubleshooting 27
- Component Troubleshooting 28
- Fan/Cooling Issues 30
- Lens Issues 31
- Menu Display Issues 32
- Pan/Tilt Issues 33
- 26 BAD BOY 34
- MAINTENANCE 35
- EQUIPMENT HANDLING 36
- ROUTINE MAINTENANCE 38
- Removing the Aft Cover 39
- Removing the Enclosure Covers 40
- If using 43
- Cleaning the Lenses 44
- DO NOT use window cleaner! 45
- Cleaning the Reflector 48
- Cleaning the UV/IR Window 49
- REMOVE AND REPLACE PROCEDURES 50
- Adjusting the Lamp 52
- Replacing a Gobo 53
- EXPLODED VIEW 57
- Replacing the Front Glass 58
- Replacing the Wheel Stack 59
- 56 BAD BOY 64
- ORIENTATION 65
- REAR VIEW 65
- HEADER SIDE 65
- Replacing a Zoom Sensor PCB 67
- Replacing the Main Head Fan 70
- Be sure to align fan ducts 74
- Replacing the Reflector 75
- Replacing a 2A Fuse 76
- Replacing the 3A Fuse 77
- 70 BAD BOY 78
- CABLE LAYOUT - REAR VIEW 79
- 72 BAD BOY 80
- Do not disconnect cables 81
- Replacing the Ignitor PCB 82
- Figure 3-36 83
- 78 BAD BOY 86
- Setting Pan/Tilt Belt Tension 91
- ILLUSTRATED PARTS BREAKDOWN 93
- OVERVIEW 94
- PARTS BREAKDOWN 95
- Bad Boy Spares Kit 97
- 94 BAD BOY 102
- TECHNICAL SPECIFICATIONS 103
- Bad Boy Spot Luminaire 104
- (766 mm) 106
- 30.15" 106
- Photometric Data 108
- 8º Full Angle 109
- 40,000 beam Lumens 109
- Iris Full Open 109
- 34º Full Angle 110
- 48,000 beam Lumens 110
- 56º Full Angle 111
- 50,000 beam Lumens 111
- Operation at Reduced Power 112
- WIRING DIAGRAMS 113
- Version as of: June 23, 2011 114
- Production Resource Group 115
- Dallas Office 115
- Dallas, Texas 75247 115
Relacionado con productos y manuales para Encendiendo Prg Bad Boy Field Service Manual
(48 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.070 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales