Prg Bad Boy Field Service Manual Manual de usuario descargar pdf (Pagina 90)

82 BAD BOY

SPOT LUMINAIRE FIELD SERVICE MANUAL

Replacing the Tilt Drive Assembly

Parts:

21.9812.0719 1 EA ASSY, TILT DRIVE

Tools:

#2 Philips screwdriver

7/16" open-ended wrench

3/8" Nutdriver

Sonic Tension Meter, Model 507C (07.3082.1052.0)

WARNING: Remove power from luminaire before performing any maintenance procedures.

To replace the Tilt Drive Assembly:

Step 1. Remove power from luminaire and allow components to cool for at least 5 minutes.

Step 2. Remove both Yoke Covers by loosening four captive screws (Figure 3-39).

Step 3. At Tilt-Side Yoke Leg, remove Yoke Handle by removing two 10-32 x 5/8" PFZ screws (Figure 3-42).

Figure 3-42: Removing Tilt Drive Assembly

Yoke Handle

10-32 x 5/8"

PFZ Screw (2)

Tilt Drive Assembly

10-32 Nylon

Tilt Pulley

Belt

#10 Flat Washer (4)

Insert Nut (4)

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 114 115

Sin comentarios

Prg Bad Boy Field Service Manual Manual de usuario Pagina 90