Prg Bad Boy Field Service Manual Manual de usuario descargar pdf (Pagina 61)

BAD BOY

SPOT LUMINAIRE FIELD SERVICE MANUAL 53

Step 5. At Wheel Stack Assembly, remove four 8-32 x 1/2" socket head screws (Figure 3-20).

Step 6. Verify that Lens Group 1 will not interfere with removal of Wheel Stack Assembly. If lenses are in the way,

turn Group 1 pulley until lenses are clear.

Step 7. Grasp Wheel Stack Assembly on either side and lift straight up and out of luminaire head.

Figure 3-20: Removing Wheel Stack Assembly

Step 8. Replace Wheel Stack Assembly by doing steps in reverse.

Wheel Stack

Assembly

8-32 x 1/2"

SCB Screw (4)

Lens Group 1

Depending on the Bad Boy luminaire

model, the Wheel Stack Assembly will be

different. The CMY Wheel Stack can be

identified by a label on the outer plate.

NOTE:

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 114 115

Sin comentarios

Prg Bad Boy Field Service Manual Manual de usuario Pagina 61