Prg Bad Boy Field Service Manual Manual de usuario descargar pdf (Pagina 74)

66 BAD BOY

SPOT LUMINAIRE FIELD SERVICE MANUAL

Replacing the UV/IR Window Assembly

Parts:

22.9812.0616 1 EA ASSY, UV/IR WINDOW

Tools:

#2 Philips screwdriver

#1 Philips screwdriver, stubby

WARNING: Remove power from luminaire before performing any maintenance procedures.

CAUTION: Do not touch UV/IR Window with bare fingers. If dirty, clean with OptiMax™ Ultra Pure Cleaning

Solution and a Micro Fiber cloth.

To replace the UV/IR Window Assembly:

Step 1. Remove power from luminaire and allow components to cool for at least 5 minutes.

Step 2. Remove Head Covers. (Refer to "Removing the Head Covers" on page 30.)

Step 3. Remove Wheel Stack Assembly. (Refer to "Replacing the Wheel Stack" on page 51.)

Step 4. Remove UV/IR Assembly by removing four 4-40 x 1/4" PPSS screws (Figure 3-30).

Step 5. Replace UV/IR Assembly by doing steps in reverse.

Be sure to align fan ducts

Figure 3-30: Removing UV/IR Window Assembly

UV/IR Window

Assembly

4-40 x 1/4" PPSS

Screw (4)

Duct Hole

Fan

INTERIOR DETAIL VIEW

Duct

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 114 115

Sin comentarios

Prg Bad Boy Field Service Manual Manual de usuario Pagina 74