Prg Bad Boy Field Service Manual Manual de usuario descargar pdf (Pagina 75)

BAD BOY

SPOT LUMINAIRE FIELD SERVICE MANUAL 67

Replacing the Reflector

Parts:

42.9812.0160 1 EA REFLECTOR, 36 LUNES, COATED

Tools:

#2 Phillips screwdriver, long

#2 Philips screwdriver, right-angle

Cotton gloves or finger cots

WARNING: Remove power from luminaire before performing any maintenance procedures.

CAUTION: Do not touch reflector with bare fingers. If dirty, clean with OptiMax™ Ultra Pure Cleaning

Solution and a Micro Fiber cloth.

To replace the Reflector:

Step 1. Remove power from luminaire and allow components to cool for at least 5 minutes.

Step 2. Remove Aft Cover. (Refer to "Removing the Aft Cover" on page 31.)

Step 3. At Reflector, loosen four 6-32 x 1/4" PPB screws to free mounting clips (Figure 3-31).

Step 4. Remove Reflector by carefully sliding out from under XYZ Assembly. (Insulator will come loose during

removal. Do not lose Insulator.)

Step 5. Replace Reflector by doing steps in reverse.

Figure 3-31: Removing Reflector

Reflector

Mounting

6-32 x 1/4"

Insulator

Head Assy

Clip (4)

PPB Screw (4)

XYZ Assembly

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 114 115

Sin comentarios

Prg Bad Boy Field Service Manual Manual de usuario Pagina 75